Sulky Sticky Fabri-Solvy stabilizer is a temporary fabric-like water-soluble stabilizer sheet and they will make your next stitching projects a breeze to do!

Draw, copy, or print your design onto the stabilizer. (It is recommended to use a draft setting on your printer). Remove the backing (like a sticker) and stick the patch onto your project area. Stitch the design, then wash away the stabilizer with luke-warm water. Let dry.

Each printable sheets measures 8.5" x 11” which are A4 / copy paper size making them easy to use with a home or office printer.

Available in packs of :
- 2 sheets
- 4 sheets
- 6 sheets 


HOW TO USE:

♡ TO PRINT A DESIGN, place the design in a copy machine, (or you can print a design from your computer sent to your ink-jet or laser printer), place the stabilizer in the paper tray make sure you are printing on the stabilizer side - not the release sheet side. Use a light (draft) setting on your printer or copy machine.

♡ TO TRACE A DESIGN, onto the stabilizer you can use permanent-ink or water-soluble marker. - Remove the release sheet and smooth the printed or traced stabilizer, sticky side down, onto the right side of your fabric so you can stitch through it. Use quality embroidery thread to avoid the colors bleeding onto your fabric, make sure all your threads are secure with knots and tucking ends.

♡ REMOVAL is easy once stitching is completed. Carefully cut away the excess Stabilizer. Wash away to remove any residual sticker in warm water for 2-3 minutes. Rinse thoroughly. Air dry on a towel or in a dryer, if your project allows. If any stiffness remains after it is dry, simply repeat the process.

Great for transferring a design for hand embroidery, cross stitch, punch needle, quilting, monogramming or computerized machine embroidery.